Your cart is empty now.
Account
The ConSole+ provides an angle of 15 degrees.
The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+.
The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.
Details: Colour: black Suitable for flat-roof- and ground mounting installations For framed PV-modules Technical Data: Material: HDPE, Aluminium and stainless steel Weight: 7,900 kg Max# module length: 1550-2400 mm Holes gap - width: 895-1014 mm Holes gap - length: 690-1180 mm Other Contents: 1 x 500075 ConSole+ 2 x 400005 ConSole U-Profile 1035 mm 4 x 900027 Hexag# screw DIN933-M6x20 A2-70 4 x 900028 Washer DIN9021-6,4-A2 4 x 900029 Self-locking hexag# nut DIN985-M6-A2 4 x 900106 ConSole Clip 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8‚
‚
‚
‚
‚
‚
‚
Keywords: REN520075K, PV Mounting, Flat Roof Tray
Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.
On Special Offer!
REN-520075-GROUND
ConSole+ Ground Mount
If you have any technical queries about this product or wish to report any issues with the information on this page then please use the
Contact Form
to contact us.
- Supplier Part No:
- 520075-K
- Weight:
- 8 kg
- Length:
- 1.71 m
Renusol GmbH based in Cologne (Germany) and is among the fastest growing businesses on the European market for PV mounting systems. The manufacturer of high-quality mounting solutions is successful with its 4 core mounting options, VarioSole, MetaSole, InterSole and ConSole in many European countries.
- Not required parts
- REN-920106 ConSole Clip Set (BTO) Spare clips are included with the Console+ product so are not normally required.
- Optional other parts
- One of the followingElongation Rails
- REN-460001 ConSole+ (incl. Mounting material and U-Profile) For use with module widths > 1014mm and < 1084mm
- REN-460196 ConSole+ (incl. Mounting material and U-Profile)
- One of the followingRear Grip Clamp
- REN-420023 ConSole+ (incl. Mounting material and U-Profile) For use with module with Vertical size > 1750mm and < 2150mm
- One of the followingStreamliner
- REN-520076 ConSole+ (incl. Mounting material and U-Profile) To reduce the windloading on the back row of modules
- Possible Alternatives
- REN-420600 TriSole + L-Profile cross striving profile (SET)